DS2441芯片解密成功案例

 

芯谷科技长期从事单片机解密（MCU解密）、专用IC解密、芯片解密、PLD芯片解密、CPLD芯片解密、DS2441解密、DSP芯片解密、ARM芯片解密，软件解密，单片机软硬件开发等技术研究与技术服务，在理论与实践方面都积累了丰硕的成果，为芯片解密的可靠性和精准性提供了绝对的保障，客户可安心、放心地把任一款芯片解密的任务交由我们来完成。

更多的芯片解密资料你可以通过http://www.pcbqc.com/访问了解到

DS2441 FEATURES：

·Provides all identification, information,
instrumentation and protection functions
needed in a lithium-ion battery pack
·Supports one-cell battery packs
·Protects cell from:
– overvoltage (overcharge)
– undervoltage (overdischarge)
– overcurrent (charging and discharging)
– high temperatures (thermal runaway)
·Current accumulator tracks remaining battery
capacity in 0.5% increments
·Voltage measurement with 10 mV accuracy
·Temperature measurement with ±2°C
accuracy eliminates need for thermistor
·32-byte user memory stores battery data
·64-bit ROM ID uniquely identifies each
battery pack
·1-Wire. interface carries all commands and
data via a single wire
·Programmable alarm warns when cell is
nearly discharged
·Programmable I/O pin supports LEDs,
vibration motors and other features
·Operating temperature range: -40°C to +85°C
·10kV ESD rating

DESCRIPTION芯片解密
The DS2441 1-Cell Li-Ion Battery Manager provides all essential functions for monitoring, protecting
and managing one-cell lithium-ion battery packs. The DS2441 constantly measures cell voltage, current,
and temperature, and automatically takes action to disable charging and/or discharging of the cell to
protect it when undesirable conditions arise.

Via its 1-Wire interface, the DS2441 provides the host system access to identification information, status
data, configuration and control settings, instrumentation registers, and general purpose data storage. Each
DS2441 has a factory-programmed 64-bit ROM ID which allows the host system to verify the
authenticity of the battery pack as well as a factory-programmed 16-bit manufacturing ID which can be
used to encode assembly location, cell chemistry and other information. A full set of status information
in the DS2441 keeps the host informed about protection conditions, remaining capacity and other matters.
Configuration and control fields in the device allow the host to disable charging and/or discharging, put
the battery pack in a low-power mode, and set various timing parameters. In addition, instrumentation
registers on the chip present the host with high-accuracy temperature, voltage, and current measurements
as well as information on remaining capacity and cycle life. Thirty-two bytes of general purpose memory
in the DS2441 are available for storing pack-specific information.
When the cell voltage reaches the undervoltage cutoff, the DS2441 automatically enters a low-power
mode in which it consumes only 1μA of battery current. When a battery charger is applied to the pack,
the DS2441 automatically leaves its low-power mode to support charging. A refresh feature in the
DS2441 allows even the most severely discharged battery packs to be refreshed and recharged. The
DS2441 also features a programmable I/O pin that allows the host system to sense and control other
electronics in the pack, such as vibration motors, speakers and LEDs.
需要芯片解密的朋友你可以通过下面的联系方式联系我们，

深圳市世纪芯集成电路有限公司
地址：深圳市福田区国际科技大厦2603单元
地 区 邮 编：518033
24小时业务服务热线：086-0755-83035821
24小时技术咨询热线：086-0755-83035861
电子商务中心服务热线：086-0755-83035865
24小时投诉处理电话：086-0755-83035701
传真：086-0755-83035836
联系邮箱（Email）：corecentury@126.co